( 2.3.1 PC Programming)įollow the Quick Setup instructions if starting KX-TDA Maintenance Console for the first time, otherwise, proceed to the next step.

The password for each programmer code is 1234 by default. To connect to the PBX via USB, the KX-TDA USB driver must be installed on the PC, as explained above in 'Installing KX-TDA Maintenance Console'.Įnter the password appropriate to the programmer code entered in Step 2 and click. ( 2.3.3 Quick Setup)Ĭlick ' Connect' ' USB' from the menu bar.

When starting KX-TDA Maintenance Console for the first time (i.e., either when the PBX is still set to the factory default settings, or after initializing the PBX), Quick Setup can be launched automatically by entering the Installer Level Programmer Code and password. Therefore, we recommend to save a backup system data.The screenshots shown here are for reference only, and may differ from the screens displayed on your PC.Įnter a valid programmer code ( INSTALLER, ADMIN, or USER), then click. If you do not have a backup system data, you have to set the PBX to the factory default and reprogram it.

As for a backup system data, refer to '3.3.4 Hybrid IP-PBX Maintenance'. If you have a backup system data, you can find the password by loading the backup system data onto the PC and check the password using the programming tool. If the system password is forgotten, you can examine the backup of the system programming. We strongly recommend that a password of 10 digits is used for maximum protection against hackers. This will avoid unauthorized access and possible dial through fraud. Please maintain the secrecy of the password. Please inform the customer of the importance of the password and the possible dangers. Warning to the Administrator regarding the system password A password is required to perform programming for security purposes.

Kx tda50 maintenance console software